Stereo amplifier 2 × 15 W
Electronica
- Manufacturer
- Electronica
- Country
- Romania
- Year
- Unknown
- Category
- Audio
- Type
- Amplifiers
- Documentation score
- 1/5
- Last edited
- 03 OCT 2026
Specifications
- Output power
- 2 × 15 W
- Frequency response
- 40–20,000 Hz
- Distortion
- < 1.5%
- Signal-to-noise ratio
- 50 dB
- Crosstalk
- 40 dB at 1000 Hz, 30 dB over 250–10,000 Hz
- Inputs / sensitivity
- piezo pick-up 600 mV / 470 kΩ; magnetic pick-up 5 mV / 17 kΩ; radio 150 mV / 100 kΩ; tape 150 mV / 47 kΩ
- Features
- stabilised supply for the output stages with overload cut-out and automatic recovery; short-circuit current limiting
- Power consumption
- 30 VA without signal, about 100 VA at rated power
- Dimensions
- 465 × 300 × 95 mm
Sources: [1]
Description
The 2 × 15 W stereo amplifier is a fully transistorised amplifier made by Electronica in Bucharest from the early 1970s, supplied only in a cabinet, with four inputs: piezo pick-up, magnetic pick-up, radio and tape recorder [1]. Its output stages have a stabilised supply that cuts out on overload and recovers automatically, and are protected against short circuits [1]. A smaller model was the 2 × 6 W amplifier [1].
Early in the 1970s Electronica put into production two fully transistorised stereo amplifiers for the general public, of 2 × 6 W and 2 × 15 W; both have volume, separate bass and treble and balance controls, a mains indicator lamp, and front push-buttons for stereo, mono left, mono right or mono on both channels [1]. Over the years they were made in improved versions [1].
In the source, output power is given per channel at 1000 Hz into 5 Ω, the frequency response within 3 dB, and distortion at rated power over 70–10,000 Hz [1].
Gallery
No other images available yet.
Schematics
No schematics available yet.
Documents
No documents available yet.