Specifications
- Function
- low-power transistors, Zener diodes, diodes
- Measuring ranges
- Uc 0.1–20 V; Ic 1–30 mA; leakage 5 µA – 0.3 mA; h21e 10–1000; Uz 0.5–15 V
- Accuracy
- h21e < 5%; voltage and current < 3%
- Power supply
- 220 V ±10%
- Power consumption
- max 6 VA
- Dimensions
- 250 × 125 × 200 mm (W × H × D)
- Weight
- 4 kg
Sources: [3]
Description
The E0702 is a transistor meter, made by IEMI in Bucharest and designed at the ICE research institute [1].
ICE’s laboratory for electronic instruments for measuring electrical quantities designed all the institute’s generations of oscilloscopes, voltmeters, multimeters, signal generators, frequency meters, logic analysers, RLC bridges and stabilised AC power supplies; they went into production at IEMI or in ICE’s own microproduction workshop, and equipped industrial laboratories and production lines as well as teaching and research laboratories [1]. In the 1970s and 1980s about half of the components of measuring instruments were imported; after 1980 about three quarters were Romanian [1].
It is specialised for Zener diodes; an E0702 B version was also made [2]. IEMI’s production table lists 1,145 units made in 1973–1977 [2].
Annex III.2.10 describes it as an instrument for fast and precise measurement of low-power PNP and NPN transistors and of point-contact and junction Zener diodes, with quick connection of the parts under test, used in research and factory laboratories and in production. It tested transistors at collector voltages of 0.1–20 V and currents of 1–30 mA, measuring current gains (h21e) of 10–1000 with an error under 5%, and Zener diodes of 0.5–15 V [3].
Gallery
No other images available yet.
Schematics
No schematics available yet.
Documents
No documents available yet.
References
- [1]N. Millea (coord.) et al. – „Electronica românească. O istorie trăită”, vol. II „Electronica profesională”, AGIR, section II.4.1 „Laborator aparate electronice pentru măsurarea mărimilor electrice”, pp. 109–115
- [2]N. Millea (coord.) et al. – „Electronica românească. O istorie trăită”, vol. II „Electronica profesională”, AGIR, sections III.2 „Producția IEMI” and III.3 „Comentarii tehnico-economice”, pp. 302–317, and annex III.2.3 „Producția IEMI – aparate electronice de măsură și industriale”, pp. 383–386
- [3]N. Millea (coord.) et al. – „Electronica românească. O istorie trăită”, vol. II „Electronica profesională”, AGIR, annex III.2.10 „Aparate pentru măsurarea parametrilor componentelor și circuitelor”, pp. 634–646
